How to Save Water with Flow Reducers and Faucet Aerator

How to Save Water with Flow Reducers and Faucet AeratorFlow reducers and faucet aerators are a modern way to save water without necessarily affecting the flow of water. A faucet aerator can be described as a tiny, disc-shaped, kit that can be attached at the end of any modern faucet.


They are simply meant to reduce the flow rate of a faucet by mixing the water with air. This increases the pressure and the water is generated forcefully, making it appear like the faucet is throwing out more water than it actually is.

Flow reducers will also reduce the amount of water used but not with the help of air. Unlike the aerators, they will just provide a steady stream of water without any elevated pressures or aeration.

Being the last part that the water flows through, an aerator is monumental in deciding the exact style of water flow. Most people have admitted to require a higher water flow in the kitchen when cleaning the pots and other utensils but the reality is that cleaning pans and pots doesn’t call for a  higher flow rate when planned our carefully. But since our busy schedules will hardly allow us to work out a proper water conservation plan in our kitchens, an aerator or a flow reducer becomes a necessity in the kitchen and the bathroom as well.


How Much Water Can Be Saved With Flow Reducers And Faucet Aerators?

Most people wonder whether these water-saving gadgets are really worth their time. The truth is that, unless you have used a flow reducers or a faucet aerator personally, you will never know just how much you can save through an apparently reduced water bill.

The recommended maximum flow rate, according to experts is in the whereabouts of 1.5gpm. With a good water saving gadget, any household will be in a position to stay far below this rate and still perform the same everyday activities as effectively as before.

Faucet aerators and flow reducers tend to wear our very fast and should therefore be replaced on a regular basis. With a high quality aerator or reducer, it is very possible conserve your water up to a flow rate of 1.0gpm.

Replacing an aging aerator is not a difficult task. It simply involves unscrewing the aged one using pliers (channel-type) or your bare hands if you don’t have pliers.  Many of them will come off easily when you use a counter-clockwise motion since they are normally secured using a clockwise course. To maintain hygiene, ensure that the new aerator is uncontaminated by cleaning it thoroughly using a mild detergent and remember to clean the faucet threads too.

After you have unscrewed the old aerator and cleaned it well, use your strong hand to tighten it into place.  The last step is to turn on the water to check for spills and leaks. If you notice any, you will have to tighten it further or loosen it a bit according to your observations.


If you have never heard of flow reducers and faucet aerators until today and would love to try them out, you will be glad to know that most modern faucets in the market today are already equipped with these gadgets.